Home
Operating procedures
Choosing operating mode and key transmit parameters
Selecting Inactive mode
Inactive mode is provided to pause the operation temporarily. Neither transmission nor reception takes place. The current echoes are removed from the display presentation.

Purpose
Document information
About this manual
The purpose of this publication is to provide the descriptions and procedures required to allow for efficient use of the ST90 system. The manual does not contain detailed information about functions, dialog boxes and operating parameters.
Simrad ST90
Operating procedures
- Getting started
- Choosing operating mode and key transmit parameters
  - Selecting Normal mode to start pinging
    In order to transmit ("ping"), you must set the ST90 system to Normal operating mode. This is the default mode when the ST90 system is turned on.
  - Selecting Replay mode
    Replay mode allows you to play back previously recorded raw data. The ST90 system cannot operate normally while in Replay mode. Neither transmission nor reception takes place.
  - Selecting Inactive mode
    Inactive mode is provided to pause the operation temporarily. Neither transmission nor reception takes place. The current echoes are removed from the display presentation.
  - Setting up the ST90 system for maximum echo refresh rate
    You can set up the ST90 system to transmit (ping) as often as possible. This gives you the maximum refresh rate.
  - Transmitting single pings
    You can set up the ST90 system to transmit a single ping only when you want it.
  - Transmitting with fixed-time intervals
    You can set up the ST90 system to transmit pings with a fixed time interval.
  - Adjusting the output power to match varying conditions
    You are permitted to adjust the output power from the ST90 system. Tx Power is used to control the amount of power that is transmitted with each ping.
  - Selecting the best operating frequency
    The Frequency function is used to control the centre frequency of the acoustic transmissions (pings). You can select any operational frequency from 14 to 24 kHz. All types of noise matter when you wish to find the best operating frequency.
- Controlling the gain and range settings
- Using the markers and tracking features
- Improving the recognition of fish and schools using receiver filters
- Recording and replaying echo data
- Recording and exporting processed echo data
- Capturing the display presentation in image and video files
- Setting up presentation modes and views
- Defining the visual information in the sonar views
- Defining settings related to user preferences and individual customizing
- Saving, retrieving and maintaining user settings
- Defining the user-selected features on the Operating Panel
- Exporting sensor data, marker positions and technical information
User interface
Menu system
Functions and dialog boxes
The functions and dialog boxes provided in the ST90 user interface are not described in this publication.
Technical specifications
The technical specifications summarize the main functional and operational characteristics of the ST90 system. They also provide information related to power requirements, physical properties and environmental conditions.
Datagram formats
The ST90 system can send and receive information to and from several different peripherals. All transmissions take place as datagrams with data sentences. Each datagram has a defined format and length.
Copyright

Selecting Inactive mode

Inactive mode is provided to pause the operation temporarily. Neither transmission nor reception takes place. The current echoes are removed from the display presentation.

The Operation function controls the operating mode of the ST90 system.

Note:

Note that Inactive operating mode is not the same as Passive mode. While Inactive mode stops both transmission and reception, Passive mode will still allow the ST90 system to receive echoes. To select passive mode set Operation to Normal, Noise Filter and Tx Power to Off.

Procedure

Open the Operation menu.
Set Operation to Inactive.
When the ST90 system is disabled with this function, it will stop. The transmission ("pinging") stops.The current echoes are removed from the display presentation.