Home
Operating procedures
Improving the recognition of fish and schools using receiver filters
Reducing propeller noise and interference with the Noise Filter
Unless you synchronize the transmissions from your other hydroacoustic systems you may have an issue with interference. Even with synchronization activated the noise from other nearby vessels may cause noise.

Purpose
Document information
About this manual
The purpose of this publication is to provide the descriptions and procedures required to allow for efficient use of the ST90 system. The manual does not contain detailed information about functions, dialog boxes and operating parameters.
Simrad ST90
Operating procedures
- Getting started
- Choosing operating mode and key transmit parameters
- Controlling the gain and range settings
- Using the markers and tracking features
- Improving the recognition of fish and schools using receiver filters
  - About the receiver filter sequence in the ST90 system
    The filters in the ST90 system are implemented in “series�?. Any changes to a filter setting may therefore have an effect on subsequent filters.
  - Reducing noise and reverberation with the AGC (Automatic Gain Control) function
    Identifying echoes from fish and schools can often be challenging when they are hidden by noise and reverberation. When sonar conditions are poor, effective tuning of the filters in the ST90 system may be necessary to achieve a satisfactory result. Automatic Gain Control (AGC) is one of the tools provided to remove noise and reverberation from the echo presentation.
  - Reducing propeller noise and interference with the Noise Filter
    Unless you synchronize the transmissions from your other hydroacoustic systems you may have an issue with interference. Even with synchronization activated the noise from other nearby vessels may cause noise.
  - Reducing bottom and surface reverberation with the RCG (Reverberation Controlled Gain) function
    When you transmit an acoustic pulse into the water to search for a target, echoes will also be returned from any other objects in the beam. The energy reflected from these "unwanted" objects is referred to as reverberation. Reverberation is often a limiting factor, especially if you are searching for smaller targets.
  - Reducing noise and false echoes with the Ping-Ping Filter
    The Ping-Ping Filter analyses the historical information from previous consecutive pings in order to remove unwanted noise and interference from the echo presentation.
  - Reducing the strong bottom echo to see fish close to the seabed
    Fish close to the bottom can be hard to see because they may be hidden in the strong bottom echo.
  - Adjusting the intensity of the echo presentations
    The effect of the Gain adjustment is minimized if you apply RCG (Reverberation Controlled Gain) and AGC (Automatic Gain Control). The Display Gain is applied at the end of the filter sequence in the ST90 system. This means that you can use Display Gain if you are not completely satisfied with the results of the automatic gain functionality.
- Recording and replaying echo data
- Recording and exporting processed echo data
- Capturing the display presentation in image and video files
- Setting up presentation modes and views
- Defining the visual information in the sonar views
- Defining settings related to user preferences and individual customizing
- Saving, retrieving and maintaining user settings
- Defining the user-selected features on the Operating Panel
- Exporting sensor data, marker positions and technical information
User interface
Menu system
Functions and dialog boxes
The functions and dialog boxes provided in the ST90 user interface are not described in this publication.
Technical specifications
The technical specifications summarize the main functional and operational characteristics of the ST90 system. They also provide information related to power requirements, physical properties and environmental conditions.
Datagram formats
The ST90 system can send and receive information to and from several different peripherals. All transmissions take place as datagrams with data sentences. Each datagram has a defined format and length.
Copyright

Reducing propeller noise and interference with the Noise Filter

Unless you synchronize the transmissions from your other hydroacoustic systems you may have an issue with interference. Even with synchronization activated the noise from other nearby vessels may cause noise.

The Noise Filter is used to minimize the interference from other acoustics systems (sonars and echo sounders) on your own and/or other vessels. The filter also suppresses noise from your propellers, and from other similar noise sources. The Noise Filter is very effective if you are bothered by strong noise or interference, especially from your own vessel, or even from other vessels operating near you.

Tip:

Use weak filtering - or turn the filter off - if you have strong echoes on short ranges. The filter may then be too powerful, and distort the echo presentation.

The filters in the ST90 system are implemented in “series�?. The noise filtering is done early in the receiver process.

Procedure

Click in any view to make it active.
The active view is identified with a thicker border.
Open the Active menu.
Select Noise Filter.
Select a value from the options provided.